GasAlertMax
Maintenance
Maintenance
To keep the detector in good operating condition, perform the
following basic maintenance as required:
• Calibrate, bump check, and inspect the detector at
regular intervals.
• Keep an operations log of all maintenance, calibrations,
bump checks, and alarm events.
• Clean the exterior with a soft damp cloth. Do not use
solvents, soaps, or polishes.
• Do not immerse the detector in liquids.
Replacing the Battery
a Warning
To avoid personal injury:
• Replace the battery as soon as the detector emits a
low battery alarm.
• Use only a Black & Decker VersaPak™ battery,
properly installed in the detector case.
• To properly remove the battery from the detector,
use the release button.
• Only charge batteries using a VersaPak™ charger
(such as the D4-VP130 or V-CHRG1). Do not use any
other charger. Failure to observe this precaution
could lead to fire or explosion.
• Do not change or charge batteries in a hazardous
location. Doing so will impair the intrinsic safety of
the unit and may lead to fire or explosion.
• Before you use the detector for the first time, fully
charge the battery by following the instructions
provided with the charger.
49
Commentaires sur ces manuels