Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 52

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 72
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 51
GasAlertMax
User Manual
Sampling Hose
The sampling hose can be used to draw a gas sample from a
remote area. For instructions on how to connect the sampling
hose, refer to Figure 1.
For the sample to reach the detector, allow approximately
3 seconds per 1 ft./0.3 m of hose.
Datalog
The GasAlertMax datalogger version allows the detector to
record various information so a report can be compiled.
Datalog information is recorded onto the MMC (refer to the
MultiMediaCard (MMC) section) at the standard sampling
rate of 5 seconds. The following information is recorded in a
datalog:
The date and time;
The current gas readings;
TWA readings for H
2
S and CO;
The unit status; and
The serial number.
MultiMediaCard (MMC)
A standard 32 MB MMC flash memory card is supplied with
the GasAlertMax datalogger. When purchasing additional
MultiMediaCards, BW Technologies recommends Sandisk®
MMC flash memory cards that contain between 8 MB and
64 MB storage capacity.
MultiMediaCard(s) compatible with the MMC specification will
always have the exact word “MultiMediaCard” or “MMC”
written on the disk. Cards that do not contain these exact
words are not MultiMediaCards.
The MMC is not the same as the following:
MultiMedia card;
Multi media card;
SmartMedia.
Hitachi and Infineon manufacture compatible MMCs. MMCs
are available through retailers in North America and Europe.
They are also available through mail order and Internet
vendors.
42
Vue de la page 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 71 72

Commentaires sur ces manuels

Pas de commentaire