Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur télécharger pdf (Page 26)

GasAlertMax

User Manual

To access the user options menu,

activate the detector (if applicable).

Press H and G simultaneously until

the LCD displays the following two

screens. The first screen refers to

which version of firmware the detector

has.

The second screen shows that the

user options menu is being entered.

If the user options menu is pass code

protected, the following screen will

appear. You must enter the correct

pass code before you can enter the

user options menu.

Press H or G to scroll through the options.

Finish Option

To exit the options menu and return

to normal operation at any time, press

C when the LCD displays FiniSh

OPtionS.

Note

If the user has enabled/disabled the sensors, pump

test, or automatic O2 calibration options, the

detector administers a self-test after FiniSh

OptionS is selected. Refer to

Self-Test.

Date and Time Option

Note

Time and date adjustments only apply to user

downloadable datalogger detectors.

To set the real-time clock calendar,

press C when the LCD displays

AdJuSt Clock.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 71 72

Pas de commentaire

Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 26