Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur télécharger pdf (Page 23)

GasAlertMax

Activating the Detector

9. The detector then runs a pump test check (if

enabled in the user options).

10. The oxygen sensor is then automatically calibrated

(if enabled in the user options).

Battery Test

The battery is tested on activation and continuously

thereafter. If the battery is low, I LOW flashes.

Note

If the confidence beep is on, the audible alarm

beeps if the battery has sufficient power and stops

if the battery power is low. Refer to the section,

Confidence Beep.

Pump Test

The pump is tested continuously after activation. If the pump

test fails, the LCD displays the following:

Note

If the pump alarm continues for more than 5

seconds and the LCD displays InlEt bLockEd,

refer to the

Pump Calibration section.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Pas de commentaire

Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 23