Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur télécharger pdf (Page 20)

GasAlertMax

User Manual

Activating the Detector

Note

The detector must be activated before entering a

potentially explosive area.

To activate the detector, press F in a normal atmosphere

(20.9% oxygen).

Self-Test

Once the detector is activated, it performs the following

checks. Manually check that all actions occur.

1. If the battery is low, I LOW flashes and the LCD

reads OFF. Replace the battery and restart the

detector.

2. The LCD displays all the elements.

3. The audible alarm beeps, the visual alarm flashes,

and the backlight briefly turns on.

Note

Steps #4 and #5 are for datalogger models only.

4. The detector tests the data card.

Note

The MultiMediaCard (MMC) icon (

) is displayed

continuously on black box datalogger detectors and

when a card is present in user downloadable

datalogger detectors.

Datalogger operation is automatic and requires no

settings.

Black Box Datalogger

The FAIL, ALARM, and

icons blink if the card

malfunctions or is removed.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 71 72

Pas de commentaire

Black & Decker MULTI-GAS DETECTORS Manuel d'utilisateur Page 20