Black & Decker B1620 Instructions d'exploitation télécharger pdf (Page 11)

How To Use Your Breadmaker

while the hour setting is flashing. If the hour setting

has stopped flashing before the minutes have been

set, press and hold the TIMER button. With the hour

setting flashing again, immediately press the TIMER

button to set the minutes. While the “00” is flashing,

the minutes can be set to “30” using the “Up” or

“Down” arrows. When the “30” stops flashing and the

current time is displayed, the timer is set.

To start the delayed completion timer, press the

TIMER button. The completion time will flash

briefly and be replaced by the current time in the dis-

play, and the green TIMER light will come on. If the

green light does not come on, and

“13 Hr ” appears on the display, you

have set the TIMER for longer than the maximum

13 hour delay. To reset the TIMER hold the TIMER

button until the hour setting flashes, and the time can

be changed using the “Up” and “Down” arrows.

If the green light does not come on, and

“0 Hr ” appears, the TIMER has

been set for a delayed completion time which is

shorter than the actual bake time (for example 3:50 is

the bake time for Sweet Bread). Reset the TIMER for a

longer delayed completion time.

To cancel the TIMER function, press the TIMER

button and the green light will go out.

To check the completion time while the green

TIMER light is on, press the TIMER button twice.

To check the completion time while the red light is

on, press the TIMER button once.

When the actual breadmaking operation begins,

the green “timer” light will go out, the red “on” light

will come on, and total bake time (3:50 for Sweet

Bread) will appear on the display. The bake time will

count down in one minute intervals. When the end of

the countdown is reached, a beeping signal will

sound and your bread is complete. The red light will

now begin flashing to show the Breadmaker has

automatically activated the 60 minute “Keep Warm”

function.

Troubleshooting

Specific questions about the breadmaker functions

and problems with ingredients or recipes are

addressed in the “Need Help?” section beginning on

pg. 31.

● If there is an operational problem with the unit,

you may see a hyphen, colon, double hyphen

(- : --) message in the display window.

This means there is an operational/mechanical

malfunction. DO NOT USE THE UNIT. Unplug

the unit and contact your local service center for

repair. Call the toll-free number on the cover of

this booklet to ask for the location of the Black &

Decker service center nearest you.

● If the START/RESET button is pressed and the

word “HOT” appears in the display window, it

indicates that the unit has not cooled sufficiently

after baking to use immediately again. Open the

lid, remove the Baking Pan and allow the inside

of the unit to cool. Once the unit has cooled suffi-

ciently, pressing the START/RESET button will

immediately start the breadmaking operation.

● For specific problems with Bread/Dough results,

see the Troubleshooting guide on the next page:

TIMER

ERR

TIMER

ERR

Table Of Contents

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Commentaires sur ces manuels

Pas de commentaire

Black & Decker B1620 Instructions d'exploitation Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à pain Black & Decker B1620